Showing 1–12 of 109 results

Price

Price: ₹0 — ₹100000

Stock status

Spare Parts

✕ Clear selection
Concrete Cutting Machine – Electric Groove Cutting Machine (10HP–30HP) Concrete Cutting Machine – Electric Groove Cutting Machine (10HP–30HP)
CONCRETE CUTTING MACHINE HONDA (Green) CONCRETE CUTTING MACHINE HONDA (Green)
Power Trowel PT40 Heavy – 5HP Electric Geared Motor | Concrete Finishing Machine Power Trowel PT40 Heavy – 5HP Electric Geared Motor | Concrete Finishing Machine
Spartech Bar Cutting Machine GQ52J – Heavy Duty Industrial Rebar Cutting Machine | 42–50mm Capacity Spartech Bar Cutting Machine GQ52J – Heavy Duty Industrial Rebar Cutting Machine | 42–50mm Capacity
Bar Cutting Machine GQ42J – Up to 32mm TMT Bar Bar Cutting Machine GQ42J – Up to 32mm TMT Bar
BAR BENDING MACHINE GW-42J BAR BENDING MACHINE GW-42J
PF 40 5mm Pan (Bolt type) PF 40 5mm Pan (Bolt type)
Electric Panel Board Small Electric Panel Board Small
Power Trowel PT 40 blade Power Trowel PT 40 blade
Electric Panel Board Large Electric Panel Board Large
Top Mat Tikki Top Mat Tikki
Filter Mat for Vacuum Pump Filter Mat for Vacuum Pump
Top Mat with Tikki for Vacuum Pump Top Mat with Tikki for Vacuum Pump
Gear For Bull Float & Bump Cutter Gear For Bull Float & Bump Cutter
Bump Cutter – Concrete Leveling & Surface Correction Tool Bump Cutter – Concrete Leveling & Surface Correction Tool
Ruler Zpc25 (फंटी/पाटा) Ruler Zpc25 (फंटी/पाटा)
Bull Float Bull Float
Foot Brush (Nylon) Foot Brush (Nylon)
Power Trowel Pan 4 mm – Indian Type Power Trowel Pan 4 mm – Indian Type
Ride-On Trowel Pan Ride-On Trowel Pan
Edger Pan (600MM) Edger Pan (600MM)
Edger Blade Edger Blade
Power Trowel Pan / Disc (Tawa) Power Trowel Pan / Disc (Tawa)
Petrol/Power Trowel Blade DMR1000 ( Kanna ) Petrol/Power Trowel Blade DMR1000 ( Kanna )
Suction Pipe for Vacuum Pump Suction Pipe for Vacuum Pump
Concrete Texture Brush Concrete Texture Brush
Screed Vibrator (Electric Three Phase) Screed Vibrator (Electric Three Phase)
Screed Vibrator (Electric Single Phase) Screed Vibrator (Electric Single Phase)
Diamond Saw Blade for Concrete & RCC Cutting Diamond Saw Blade for Concrete & RCC Cutting
Screed Vibrator - 2 Meter - (Honda Engine) Screed Vibrator - 2 Meter - (Honda Engine)
Mini Monkey Crane with Two Wheel Trolley Mini Monkey Crane with Two Wheel Trolley
Mini Monkey Crane without Trolly Mini Monkey Crane without Trolly
Concrete Edger Concrete Edger
Double Beam Screed Vibrator Double Beam Screed Vibrator
Earth Compactor (3 HP Electric) Earth Compactor (3 HP Electric)
Hand Plaster Machine Hand Plaster Machine
Plate Compactor (Diesel Engine) Plate Compactor (Diesel Engine)
Plate Compactor (Indian Motor) Plate Compactor (Indian Motor)
Plate Compactor (Honda Engine) Plate Compactor (Honda Engine)
SCREED VIBRATOR 3 Meter (Honda) SCREED VIBRATOR 3 Meter (Honda)
Ring Making Machine (Three Phase) Ring Making Machine (Three Phase)
Ring Making Machine (Single Phase) Ring Making Machine (Single Phase)
Concrete Mixer (Tilt Type Motor) Concrete Mixer (Tilt Type Motor)
Concrete Mixer (Stand Type Motor) Concrete Mixer (Stand Type Motor)
Tamping Rammer (Three Phase Motor) Tamping Rammer (Three Phase Motor)
Tamping Rammer (Single Phase Motor) Tamping Rammer (Single Phase Motor)
Tamping Rammer (Honda Engine Original) Tamping Rammer (Honda Engine Original)
Power Trowel (Electric Single Phase) Power Trowel (Electric Single Phase)
Power Trowel with Honda Engine Power Trowel with Honda Engine
  • Concrete Cutting Machine – Electric Groove Cutting Machine (10HP–30HP)
    Concrete Cutting Machine – Electric Groove Cutting Machine (10HP–30HP)
    SKU: GCM-CG-3T-EL
    Heavy-duty 3-phase electric concrete groove cutting machine designed for deep slab cutting, expansion joints, and industrial road applications. Available in 10HP, 15HP, 20HP, 25HP, and 30HP variants. The SPARTECH Electric Groove Cutting Machine is a high-performance concrete cutting solution engineered for heavy-duty construction and infrastructure projects. Designed for precision groove cutting and deep slab cutting applications, this industrial machine delivers powerful performance through a Crompton 3-phase electric motor system. Built with a reinforced fabricated steel chassis, this cutter provides structural stability and vibration-controlled operation during high-load cutting. The machine is equipped with a precise depth adjustment mechanism that allows operators...
    ₹68,750 ₹55,000 20% OFF
    Wishlist
  • CONCRETE CUTTING MACHINE HONDA (Green)
    CONCRETE CUTTING MACHINE HONDA (Green)
    SKU: GCM-GX160
    Heavy-duty walk-behind concrete cutting machine powered by Honda GX160 engine. Designed for road cutting, slab cutting, and expansion joint work. Supports blade size up to 16 inch with cutting depth up to 2 inch (approx. 50 mm). The Concrete Cutting Machine Honda GX160 (Green – Standard Frame) is a professional-grade road cutting solution engineered for precision, durability, and consistent field performance. Designed for light to medium-duty cutting applications, this model is ideal for construction contractors, infrastructure repair teams, and industrial flooring projects. Powered by the reliable Honda GX160 petrol engine, the machine delivers stable torque output and smooth blade rotation,...
    ₹38,067 ₹30,454 20% OFF
    Wishlist
  • Dibbi Control Box – PT40 Heavy (3 Phase Electric Power Trowel)
    Dibbi Control Box – PT40 Heavy (3 Phase Electric Power Trowel)
    SKU: PT40E-EL-SP-DB001
    The Dibbi Safety Control Box for PT40 Heavy Power Trowel is an essential electrical safety and starting control unit designed specifically for three-phase electric heavy-duty power trowel machines. This unit allows the operator to start the machine using the integrated green push button. It is engineered with a built-in micro safety switch mounted at the bottom, which automatically shuts down the machine if the operator releases the handle. The micro safety mechanism is a critical operator protection feature. When the operator removes their hand from the trowel handle, the bottom micro switch disengages, instantly cutting power to the machine to...
    ₹688 ₹550 20% OFF
    Wishlist
  • Power Trowel PT40 Heavy – 5HP Electric Geared Motor | Concrete Finishing Machine
    Power Trowel PT40 Heavy – 5HP Electric Geared Motor | Concrete Finishing Machine
    SKU: PTF/40/CG-5
    The Spartech PT40 Heavy Power Trowel Cum Floater is engineered for professional concrete surface finishing applications. Designed to combine the functions of both a floater and a trowel in one powerful machine, it significantly reduces labor effort and finishing time. Its 5 HP geared electric motor provides consistent torque and smooth rotation, ensuring uniform surface finishing on industrial floors, parking areas, commercial buildings, and large slab constructions. The 2mm finishing blades and 4mm heavy-duty pan help achieve precise leveling and surface compaction, resulting in a smooth, durable finish. The adjustable handle improves operator comfort and control during long working hours....
    ₹0 ₹0
    Wishlist
  • Clutch Wire – PT-40 Power Trowel (3 Phase Electric)
    Clutch Wire – PT-40 Power Trowel (3 Phase Electric)
    SKU: PT40E-CL-SP-CW001
    The Clutch Wire for PT-40 Three Phase Electric Power Trowel is a precision control component engineered to provide smooth clutch actuation and consistent power transmission during slab finishing operations. Designed specifically for heavy-duty electric power trowel systems, this clutch cable ensures reliable mechanical linkage between the control lever and clutch assembly. It allows operators to engage and disengage the drive system smoothly, improving handling precision and operational safety. Manufactured with high-tensile inner steel cable and durable outer protective casing, the clutch wire is built to withstand continuous vibration, job-site dust exposure, and repeated operational cycles common in industrial concrete finishing...
    ₹124 ₹99 20% OFF
    Wishlist
  • Spartech Bar Cutting Machine GQ52J – Heavy Duty Industrial Rebar Cutting Machine | 42–50mm Capacity
    Spartech Bar Cutting Machine GQ52J – Heavy Duty Industrial Rebar Cutting Machine | 42–50mm Capacity
    SKU: SPT/GQ52J
    The Spartech GQ52J Bar Cutting Machine is engineered to deliver powerful and precise cutting performance for reinforced steel bars used in construction, infrastructure, and industrial fabrication projects. Designed for demanding job sites, this machine can efficiently cut up to 42mm thread steel and 50mm plain carbon steel with high accuracy. Its 4.2KW heavy-duty motor ensures smooth and uninterrupted operation, while the solid 480 KG body provides maximum stability and vibration control during high-speed cutting. With a cutting speed of 32 cuts per minute, the GQ52J significantly improves on-site productivity, reducing labor dependency and project time. Ideal for: Construction Companies Infrastructure...
    ₹102,464 ₹81,971 20% OFF
    Wishlist
  • Bar Cutting Machine GQ42J – Up to 32mm TMT Bar
    Bar Cutting Machine GQ42J – Up to 32mm TMT Bar
    SKU: SPT/GQ42J
    Heavy-duty semi-automatic bar cutting machine designed for cutting up to 32mm TMT bars with high precision and performance. Powered by a 3KW three-phase motor, ideal for construction sites, fabrication yards, and infrastructure projects. The Bar Cutting Machine GQ42J is a robust and high-performance reinforcement steel cutting solution engineered for professional construction and fabrication environments. Designed to cut TMT bars up to 32mm diameter, this machine delivers reliable and consistent cutting performance for demanding job site applications. Equipped with a powerful 3KW three-phase motor, the GQ42J ensures stable torque output and efficient cutting cycles. Its heavy-duty gearbox and hardened cutting blades...
    ₹79,070 ₹63,256 20% OFF
    Wishlist
  • Silencer for Tamping Rammer (Honda GX160 Compatible)
    Silencer for Tamping Rammer (Honda GX160 Compatible)
    SKU: TR110-GX-EN-SP-001
    The Silencer for Tamping Rammer (Honda GX160 Compatible) is a high-performance exhaust component designed to regulate engine noise levels and optimize exhaust gas flow during compaction operations. Engineered for heavy-duty construction usage, this silencer ensures controlled exhaust discharge while maintaining engine efficiency. It supports stable combustion output, helping maintain consistent impact force during soil and foundation compaction. Manufactured from heat-resistant steel with anti-corrosion coating, the silencer is designed to withstand high operating temperatures and continuous field conditions. It plays an essential role in maintaining smooth engine operation in: Soil compaction Foundation preparation Road base compaction Trench and pipeline work RCC...
    ₹1,839 ₹1,472 20% OFF
    Wishlist
  • Vibro Mount Female for ZPC25 Screed Vibrator
    Vibro Mount Female for ZPC25 Screed Vibrator
    SKU: ZPC25-VM-SP-VM007
    The Vibro Mount Female for ZPC25 Screed Vibrator is a vibration isolation component designed to absorb and regulate mechanical oscillations generated during high-speed screeding operations. This mount works in coordination with the male vibro mount to create a balanced damping interface between the vibrating housing assembly and the structural handle frame. Its function is to reduce direct vibration transfer, improve machine handling stability, and support smoother slab leveling performance. Manufactured using high-density industrial-grade rubber bonded with a precision-engineered threaded metal insert, the female vibro mount ensures structural flexibility while maintaining secure load-bearing support. Its threaded configuration allows proper alignment and...
    ₹273 ₹179 34% OFF
    Wishlist
  • Housing Shaft for ZPC25 Screed Vibrator
    Housing Shaft for ZPC25 Screed Vibrator
    SKU: ZPC25-HS-SP-HS005
    The Housing Shaft for ZPC25 Screed Vibrator is a precision-engineered internal support shaft designed to stabilize and align the rotating vibration assembly within the housing unit. This component plays a vital role in maintaining structural alignment between the drive system and the eccentric vibration mechanism. By supporting rotational balance inside the housing chamber, it contributes to smooth vibration output and consistent screed blade performance across the slab surface. Manufactured from hardened alloy steel with precision-machined tolerances, the housing shaft is built to withstand continuous rotational load and dynamic vibration forces. Its design ensures accurate fitment within the housing assembly, supporting...
    ₹487 ₹389 20% OFF
    Wishlist
  • Drive Axle for ZPC25 Screed Vibrator
    Drive Axle for ZPC25 Screed Vibrator
    SKU: ZPC25-DR-SP-DA003
    The Drive Axle for ZPC25 Screed Vibrator is a precision-machined rotational transfer component responsible for transmitting torque from the engine-driven clutch system to the internal vibration mechanism. Engineered for high rotational stability, the drive axle plays a critical role in maintaining consistent eccentric motion within the vibrator housing. Its balanced construction ensures smooth rotational performance, contributing to uniform vibration output across the screed blade. Manufactured from hardened alloy steel, the drive axle is designed to withstand continuous rotational load, torsional stress, and construction-site operating conditions. The precision finish ensures accurate alignment within the bearing and housing assembly, promoting stable mechanical...
    ₹2,309 ₹2,149 7% OFF
    Wishlist
  • Housing Weight for ZPC25 Screed Vibrator
    Housing Weight for ZPC25 Screed Vibrator
    SKU: ZPC25-WT-SP-HW002
    The Housing Weight for ZPC25 Screed Vibrator is a precision-balanced mass component engineered to enhance vibration stability and maintain consistent compaction performance during concrete leveling operations. This component is strategically integrated within the vibrator housing assembly to optimize weight distribution and maintain proper vibration dynamics. By providing calibrated mass alignment, it supports uniform oscillation of the screed blade across the slab surface. Manufactured from high-density cast metal with precision machining, the housing weight ensures durability under continuous vibration load and heavy construction usage. Its design allows seamless integration into the ZPC25 housing configuration without altering balance geometry. Proper mass distribution...
    ₹6,490 ₹5,192 20% OFF
    Wishlist
  • Concrete Cutting Machine – Electric Groove Cutting Machine (10HP–30HP)
    Concrete Cutting Machine – Electric Groove Cutting Machine (10HP–30HP)
    SKU: GCM-CG-3T-EL
    Heavy-duty 3-phase electric concrete groove cutting machine designed for deep slab cutting, expansion joints, and industrial road applications. Available in 10HP, 15HP, 20HP, 25HP, and 30HP variants. The SPARTECH Electric Groove Cutting Machine is a high-performance concrete cutting solution engineered for heavy-duty construction and infrastructure projects. Designed for precision groove cutting and deep slab cutting applications, this industrial machine delivers powerful performance through a Crompton 3-phase electric motor system. Built with a reinforced fabricated steel chassis, this cutter provides structural stability and vibration-controlled operation during high-load cutting. The machine is equipped with a precise depth adjustment mechanism that allows operators...
    ₹68,750 ₹55,000 20% OFF
    Wishlist
  • CONCRETE CUTTING MACHINE HONDA (Green)
    CONCRETE CUTTING MACHINE HONDA (Green)
    SKU: GCM-GX160
    Heavy-duty walk-behind concrete cutting machine powered by Honda GX160 engine. Designed for road cutting, slab cutting, and expansion joint work. Supports blade size up to 16 inch with cutting depth up to 2 inch (approx. 50 mm). The Concrete Cutting Machine Honda GX160 (Green – Standard Frame) is a professional-grade road cutting solution engineered for precision, durability, and consistent field performance. Designed for light to medium-duty cutting applications, this model is ideal for construction contractors, infrastructure repair teams, and industrial flooring projects. Powered by the reliable Honda GX160 petrol engine, the machine delivers stable torque output and smooth blade rotation,...
    ₹38,067 ₹30,454 20% OFF
    Wishlist
  • Dibbi Control Box – PT40 Heavy (3 Phase Electric Power Trowel)
    Dibbi Control Box – PT40 Heavy (3 Phase Electric Power Trowel)
    SKU: PT40E-EL-SP-DB001
    The Dibbi Safety Control Box for PT40 Heavy Power Trowel is an essential electrical safety and starting control unit designed specifically for three-phase electric heavy-duty power trowel machines. This unit allows the operator to start the machine using the integrated green push button. It is engineered with a built-in micro safety switch mounted at the bottom, which automatically shuts down the machine if the operator releases the handle. The micro safety mechanism is a critical operator protection feature. When the operator removes their hand from the trowel handle, the bottom micro switch disengages, instantly cutting power to the machine to...
    ₹688 ₹550 20% OFF
    Wishlist
  • Power Trowel PT40 Heavy – 5HP Electric Geared Motor | Concrete Finishing Machine
    Power Trowel PT40 Heavy – 5HP Electric Geared Motor | Concrete Finishing Machine
    SKU: PTF/40/CG-5
    The Spartech PT40 Heavy Power Trowel Cum Floater is engineered for professional concrete surface finishing applications. Designed to combine the functions of both a floater and a trowel in one powerful machine, it significantly reduces labor effort and finishing time. Its 5 HP geared electric motor provides consistent torque and smooth rotation, ensuring uniform surface finishing on industrial floors, parking areas, commercial buildings, and large slab constructions. The 2mm finishing blades and 4mm heavy-duty pan help achieve precise leveling and surface compaction, resulting in a smooth, durable finish. The adjustable handle improves operator comfort and control during long working hours....
    ₹0 ₹0
    Wishlist
  • Clutch Wire – PT-40 Power Trowel (3 Phase Electric)
    Clutch Wire – PT-40 Power Trowel (3 Phase Electric)
    SKU: PT40E-CL-SP-CW001
    The Clutch Wire for PT-40 Three Phase Electric Power Trowel is a precision control component engineered to provide smooth clutch actuation and consistent power transmission during slab finishing operations. Designed specifically for heavy-duty electric power trowel systems, this clutch cable ensures reliable mechanical linkage between the control lever and clutch assembly. It allows operators to engage and disengage the drive system smoothly, improving handling precision and operational safety. Manufactured with high-tensile inner steel cable and durable outer protective casing, the clutch wire is built to withstand continuous vibration, job-site dust exposure, and repeated operational cycles common in industrial concrete finishing...
    ₹124 ₹99 20% OFF
    Wishlist
  • Spartech Bar Cutting Machine GQ52J – Heavy Duty Industrial Rebar Cutting Machine | 42–50mm Capacity
    Spartech Bar Cutting Machine GQ52J – Heavy Duty Industrial Rebar Cutting Machine | 42–50mm Capacity
    SKU: SPT/GQ52J
    The Spartech GQ52J Bar Cutting Machine is engineered to deliver powerful and precise cutting performance for reinforced steel bars used in construction, infrastructure, and industrial fabrication projects. Designed for demanding job sites, this machine can efficiently cut up to 42mm thread steel and 50mm plain carbon steel with high accuracy. Its 4.2KW heavy-duty motor ensures smooth and uninterrupted operation, while the solid 480 KG body provides maximum stability and vibration control during high-speed cutting. With a cutting speed of 32 cuts per minute, the GQ52J significantly improves on-site productivity, reducing labor dependency and project time. Ideal for: Construction Companies Infrastructure...
    ₹102,464 ₹81,971 20% OFF
    Wishlist
  • Bar Cutting Machine GQ42J – Up to 32mm TMT Bar
    Bar Cutting Machine GQ42J – Up to 32mm TMT Bar
    SKU: SPT/GQ42J
    Heavy-duty semi-automatic bar cutting machine designed for cutting up to 32mm TMT bars with high precision and performance. Powered by a 3KW three-phase motor, ideal for construction sites, fabrication yards, and infrastructure projects. The Bar Cutting Machine GQ42J is a robust and high-performance reinforcement steel cutting solution engineered for professional construction and fabrication environments. Designed to cut TMT bars up to 32mm diameter, this machine delivers reliable and consistent cutting performance for demanding job site applications. Equipped with a powerful 3KW three-phase motor, the GQ42J ensures stable torque output and efficient cutting cycles. Its heavy-duty gearbox and hardened cutting blades...
    ₹79,070 ₹63,256 20% OFF
    Wishlist
  • Silencer for Tamping Rammer (Honda GX160 Compatible)
    Silencer for Tamping Rammer (Honda GX160 Compatible)
    SKU: TR110-GX-EN-SP-001
    The Silencer for Tamping Rammer (Honda GX160 Compatible) is a high-performance exhaust component designed to regulate engine noise levels and optimize exhaust gas flow during compaction operations. Engineered for heavy-duty construction usage, this silencer ensures controlled exhaust discharge while maintaining engine efficiency. It supports stable combustion output, helping maintain consistent impact force during soil and foundation compaction. Manufactured from heat-resistant steel with anti-corrosion coating, the silencer is designed to withstand high operating temperatures and continuous field conditions. It plays an essential role in maintaining smooth engine operation in: Soil compaction Foundation preparation Road base compaction Trench and pipeline work RCC...
    ₹1,839 ₹1,472 20% OFF
    Wishlist
  • Vibro Mount Female for ZPC25 Screed Vibrator
    Vibro Mount Female for ZPC25 Screed Vibrator
    SKU: ZPC25-VM-SP-VM007
    The Vibro Mount Female for ZPC25 Screed Vibrator is a vibration isolation component designed to absorb and regulate mechanical oscillations generated during high-speed screeding operations. This mount works in coordination with the male vibro mount to create a balanced damping interface between the vibrating housing assembly and the structural handle frame. Its function is to reduce direct vibration transfer, improve machine handling stability, and support smoother slab leveling performance. Manufactured using high-density industrial-grade rubber bonded with a precision-engineered threaded metal insert, the female vibro mount ensures structural flexibility while maintaining secure load-bearing support. Its threaded configuration allows proper alignment and...
    ₹273 ₹179 34% OFF
    Wishlist
  • Housing Shaft for ZPC25 Screed Vibrator
    Housing Shaft for ZPC25 Screed Vibrator
    SKU: ZPC25-HS-SP-HS005
    The Housing Shaft for ZPC25 Screed Vibrator is a precision-engineered internal support shaft designed to stabilize and align the rotating vibration assembly within the housing unit. This component plays a vital role in maintaining structural alignment between the drive system and the eccentric vibration mechanism. By supporting rotational balance inside the housing chamber, it contributes to smooth vibration output and consistent screed blade performance across the slab surface. Manufactured from hardened alloy steel with precision-machined tolerances, the housing shaft is built to withstand continuous rotational load and dynamic vibration forces. Its design ensures accurate fitment within the housing assembly, supporting...
    ₹487 ₹389 20% OFF
    Wishlist
  • Drive Axle for ZPC25 Screed Vibrator
    Drive Axle for ZPC25 Screed Vibrator
    SKU: ZPC25-DR-SP-DA003
    The Drive Axle for ZPC25 Screed Vibrator is a precision-machined rotational transfer component responsible for transmitting torque from the engine-driven clutch system to the internal vibration mechanism. Engineered for high rotational stability, the drive axle plays a critical role in maintaining consistent eccentric motion within the vibrator housing. Its balanced construction ensures smooth rotational performance, contributing to uniform vibration output across the screed blade. Manufactured from hardened alloy steel, the drive axle is designed to withstand continuous rotational load, torsional stress, and construction-site operating conditions. The precision finish ensures accurate alignment within the bearing and housing assembly, promoting stable mechanical...
    ₹2,309 ₹2,149 7% OFF
    Wishlist
  • Housing Weight for ZPC25 Screed Vibrator
    Housing Weight for ZPC25 Screed Vibrator
    SKU: ZPC25-WT-SP-HW002
    The Housing Weight for ZPC25 Screed Vibrator is a precision-balanced mass component engineered to enhance vibration stability and maintain consistent compaction performance during concrete leveling operations. This component is strategically integrated within the vibrator housing assembly to optimize weight distribution and maintain proper vibration dynamics. By providing calibrated mass alignment, it supports uniform oscillation of the screed blade across the slab surface. Manufactured from high-density cast metal with precision machining, the housing weight ensures durability under continuous vibration load and heavy construction usage. Its design allows seamless integration into the ZPC25 housing configuration without altering balance geometry. Proper mass distribution...
    ₹6,490 ₹5,192 20% OFF
    Wishlist
Helpline

(+91) 7210000976

Payment

Secure methods

Support

24/7 help desk

100% Safe

Secure payments

7-Day Return

Easy returns

Spartech Impex Pvt Ltd
Head Office Address : H-3/189 , 3rd Floor Sector - 16 , Rohini - 110089 Wearhouse & Factory : Shed no 153 to 157 , Street no - 10 , Gurudwara Road , Siraspur , Delhi - 11042

Phone: (+91) 7210000976
Email: support@spartech.in

Our Branches
Useful Links
Company
Categories
Download App
Payment System:
Shipping System:
Our Social Links:
Copyright ©2012 - 2026 Spartech Impex Private Limited. All Rights Reserved.